At-sea experiment of a hybrid spar type offshore wind turbine
At-sea experiment of a hybrid spar type offshore wind turbine
复制标题
混合翼梁式海上风力发电机海上试验
DOI：
10.1115/omae2013-10655
复制
发表时间：
2013
期刊：
影响因子：
--
通讯作者：
Shigeo Yoshida
中科院分区：
文献类型：
--
作者：
Shigesuke Ishida;Kentaroh Kokubun;Tadashi Nimura;Tomoaki Utsunomiya;Iku Sato;Shigeo Yoshida
日本环境省于2010财年启动了漂浮式海上风力涡轮机（FOWT）的国家示范项目。本项目采用了两个不同尺度的SPAR。第一个半尺寸模型，支持100千瓦的风力涡轮机，于2012年安装，目前正在运行。其特征在于浮子具有混合结构，即，上半部分为钢结构，下半部分为预应力混凝土结构，涡轮机为水平轴顺风型，FOWT上装有多个传感器，用于测量6自由度的运动、钢/混凝土部分的应变等因素。本文介绍了测量系统。2012年9月，FOWT受到一场巨大的台风袭击，尽管测量的波高超过了设计值，但它仍然幸存下来。还提供了风暴中漂浮物的测量记录。
Ministry of the Environment of Japan started the national demonstration project of Floating Offshore Wind Turbine (FOWT) in 2010 FY. In this project two SPARs with different scales are used. The first half-sized model, supporting a 100kW wind turbine, was installed in 2012 and is currently in operation. It is characteristic that the floater has a hybrid structure, i.e., the upper part is constructed of steel and the lower part of pre-stressed concrete and that the turbine is downwind type of horizontal axis.The FOWT is equipped with many sensors for measuring motions of 6 DOF, the strain of the steel / concrete parts and other factors. In this paper the measuring system is presented. In September 2012, the FOWT was attacked by a huge typhoon and it survived, although the measured wave height exceeded the designed value. The measured record of the floater in the storm is also presented.