Operation status of the electron cyclotron resonance ion source at Gunma University.

Operation status of the electron cyclotron resonance ion source at Gunma University.
复制标题

群马大学电子回旋共振离子源的运行状况。

DOI:
10.1063/1.4833922
复制
发表时间:
2014
期刊:
The Review of scientific instruments
影响因子:
--
通讯作者:
Y. Kano
Y. Kano
中科院分区:
--
文献类型:
--
作者:
H. Souda;S. Yamada;T. Kanai;E. Takeshita;M. Muramatsu;A. Kitagawa;M. Kanazawa;H. Izumiya;Y. Kano

文献摘要

参考文献

被引文献

相似文献

群马大学重离子医学中心的ECR离子源,即所谓的KeiGM [M.村松A. Kitagawa,Y. Sakamoto,S.佐藤,澳-地佐藤,H。Ogawa,S. Yamada,H. Ogawa,Y. Yoshida和A. G. Drentje,Rev.仪器76,113304(2005)],自2010年以来已经被操作用于癌症治疗和物理/生物实验。KeiGM通常从CH 4气体中产生230 μA的10 keV/u C(4+)离子。真空度控制在1.2 × 10(-4)~ 1.7 × 10(-4)Pa,脉冲间电流波动控制在± 10%以内。每6-8个月清洗一次引出电极,以去除沉积的碳,这会增加泄漏电流和放电。为了研究在没有此类维护的情况下长期运行的可能性,已在试验台上测试了用于清洁萃取电极的氧老化。日本国立放射线科学研究所和东津市佐贺重离子医疗加速器(SAGA-HIMAT)的相同设计的离子源也以稳定的C(4+)电流运行,适用于癌症治疗的连续运行。
An ECR ion source of Gunma University Heavy Ion Medical Center, so-called KeiGM [M. Muramatsu, A. Kitagawa, Y. Sakamoto, S. Sato, Y. Sato, H. Ogawa, S. Yamada, H. Ogawa, Y. Yoshida, and A. G. Drentje, Rev. Sci. Instrum. 76, 113304 (2005)], has been operated for cancer therapy and physical/biological experiment since 2010. KeiGM produces typically 230 μA of 10 keV/u C(4+) ions from CH4 gases. The vacuum pressure is kept between 1.2 × 10(-4) and 1.7 × 10(-4) Pa so as to suppress the pulse-to-pulse current fluctuation within ±10%. The extraction electrode is cleaned every 6-8 months in order to remove deposited carbon, which increases the leak current and discharge. In order to investigate the possibility of long-term operation without such maintenances, oxygen aging for the cleaning of the extraction electrode has been tested in the test bench. The same-designed ion sources at National Institute of Radiological Sciences and SAGA Heavy Ion Medical Accelerator in Tosu (SAGA-HIMAT) are also operated with stable C(4+) current, which are suitable for the continuous operation for cancer therapy.
紧凑型碳离子医疗加速器的可靠性
DOI: --
发表时间: 2017
期刊:
影响因子: --
作者:
H. Souda;K. Yusa;M. Tashiro;H. Shimada;A. Matsumura;Y. Kubota;E. Takeshita;S. Yamada;T. Kanai;M. Torikoshi
通讯作者: M. Torikoshi