Optimization of the deposition parameters of DLC coatings with the MCVA method
Optimization of the deposition parameters of DLC coatings with the MCVA method
复制标题
DOI：
--
复制
发表时间：
2012
影响因子：
--
通讯作者：
M. Pancielejko;A. Czyżniewski;V. Zavaleyev;A. Pander;K. Wojtalik
中科院分区：
文献类型：
--
作者：
M. Pancielejko;A. Czyżniewski;V. Zavaleyev;A. Pander;K. Wojtalik
Purpose: The purpose of the present study was to determine the optimal values of selected deposition parameters of diamond-like-carbon coatings (DLC) with the modified cathodic vacuum arc (MCVA) method which ensure obtaining of their most advantageous properties from the perspective of their application for the coating on high-speed steel tool substrates for woodworking. Design/methodology/approach: An analysis was conducted of the investigations into the influence of the selected deposition parameters of DLC coatings on the accepted optimization criteria with the use of the Taguchi module. Adhesion, hardness and friction wear resistance were accepted as the optimization criteria of DLC coatings for high-speed steel substrates. Findings: It was established on the basis of the statistical analysis of the research results that in order to ensure a high adhesion of DLC coatings to high-speed steel substrates, a thick Cr sublayer (0.3 μm) and a DLC coating (1.8 μm) is to be used, which is deposited at a high argon pressure (0.25 Pa); no substrate bias (the floating potential) is to be used. In order to obtain high hardness and friction wear resistance, higher values of substrate bias voltages (-80 V) and a low pressure of argon (0.01 Pa) are
