Mechanical Design and Test of 1200 KV Semi-Flexible SF6 Insulated Transmission Line
Mechanical Design and Test of 1200 KV Semi-Flexible SF6 Insulated Transmission Line
复制标题
DOI：
10.1109/tpas.1982.317212
复制
发表时间：
1982-06
期刊：
影响因子：
--
通讯作者：
P. Bolin;A. Cookson;P. Kommineni;K. H. Yoon
中科院分区：
文献类型：
--
作者：
P. Bolin;A. Cookson;P. Kommineni;K. H. Yoon
An SF6 insulated Semi-Flexible transmission line is described which uses a corrugated aluminum enclosure to reduce cost and provide flexibility. Mechanical behavior was evaluated using finite element computer analysis, bending, hydrostatic, thermal, vacuum and fatigue tests. A 711 mm (28 in) internal diameter, 4 mm (0.16 in) wall, 3004 aluminum enclosure with 19 mm (0.75 in) deep corrugations at a pitch of 70 mm (2.75 in) was shown adequate for internal and external pressure. A field installation centerline bending radius of 15 m (50 ft) was demonstrated. Electrical and mechanical parameters of the 1200 kV and a 550 kV design are reported. These meet the performance and cost objectives of a development program for semi-flexible SF6 insulated transmission lines jointly funded by the U. S. Department of Energy and Westinghouse.
