Real-time detection of particleboard surface defects based on improved YOLOV5 target detection.
Real-time detection of particleboard surface defects based on improved YOLOV5 target detection.
复制标题
DOI：
10.1038/s41598-021-01084-x
复制
发表时间：
2021-11-05
影响因子：
4.6
通讯作者：
Liu D
中科院分区：
文献类型：
--
作者：
Zhao Z;Yang X;Zhou Y;Sun Q;Ge Z;Liu D
Particleboard surface defect detection technology is of great significance to the automation of particleboard detection, but the current detection technology has disadvantages such as low accuracy and poor real-time performance. Therefore, this paper proposes an improved lightweight detection method of You Only Live Once v5 (YOLOv5), namely PB-YOLOv5 (Particle Board-YOLOv5). Firstly, the gamma-ray transform method and the image difference method are combined to deal with the uneven illumination of the acquired images, so that the uneven illumination is well corrected. Secondly, Ghost Bottleneck lightweight deep convolution module is added to Backbone module and Neck module of YOLOv5 detection algorithm to reduce model volume. Thirdly, the SELayer module of attention mechanism is added into Backbone module. Finally, replace Conv in Neck module with depthwise convolution (DWConv) to compress network parameters. The experimental results show that the PB-YOLOv5 model proposed in this paper can accurately identify five types of defects on the particleboard surface: Bigshavings, SandLeakage, GlueSpot, Soft and OliPollution, and meet the real-time requirements. Specifically, recall, F1 score, mAP@.5, mAP@.5:.95 values of pB-Yolov5s model were 91.22%, 94.5%, 92.1%, 92.8% and 67.8%, respectively. The results of Soft defects were 92.8%, 97.9%, 95.3%, 99.0% and 81.7%, respectively. The detection of single image time of the model is only 0.031 s, and the weight size of the model is only 5.4 MB. Compared with the original YOLOv5s, YOLOv4, YOLOv3 and Faster RCNN, the PB-Yolov5s model has the fastest Detection of single image time. The Detection of single image time was accelerated by 34.0%, 55.1%, 64.4% and 87.9%, and the weight size of the model is compressed by 62.5%, 97.7%, 97.8% and 98.9%, respectively. The mAP value increased by 2.3%, 4.69%, 7.98% and 13.05%, respectively. The results show that the PB-YOLOV5 model proposed in this paper can realize the rapid and accurate detection of particleboard surface defects, and fully meet the requirements of lightweight embedded model.
登录
查看更多内容
影响因子：
7.4
作者：
Li, Shuwei;Gu, Xingyu;Dong, Qiao
通讯作者：
Dong, Qiao
影响因子：
6
作者：
Wang, Yutong;Wang, Kunfeng;Wang, Fei-Yue
通讯作者：
Wang, Fei-Yue
影响因子：
8.3
作者：
Xu, Beibei;Wang, Wensheng;Schneider, Derek
通讯作者：
Schneider, Derek
影响因子：
3.9
作者：
He, Ting;Liu, Ying;Fan, Jianan
通讯作者：
Fan, Jianan
影响因子：
2.2
作者：
Way, Daniel;Kamke, Frederick A.;Sinha, Arijit
通讯作者：
Sinha, Arijit