Surface modification of pure titanium by plasma exposure and its bonding to resin.
Surface modification of pure titanium by plasma exposure and its bonding to resin.
复制标题
通过等离子体暴露对纯钛进行表面改性及其与树脂的粘合。
DOI：
10.4012/dmj.24.53
复制
发表时间：
2005
影响因子：
2.5
通讯作者：
J. Takahashi
中科院分区：
文献类型：
--
作者：
Hiroyuki Kibayashi;F. Teraoka;S. Fujimoto;M. Nakagawa;J. Takahashi
研究了不同气氛下等离子体对纯钛与树脂剪切结合强度的影响。使用等离子体暴露装置在空气、CO2和C3 F8的气体气氛中处理抛光的Ti样品。通过表面自由能和XPS测量实现了暴露于等离子体的Ti的表面分析。用粘合剂树脂（4-Meta、MAC-10、HEMA、MDP、VBATDT）将钛样品粘合到不锈钢件上。然后进行剪切粘附试验。结果表明，等离子体暴露在特定的气体气氛中调节钛表面与树脂的结合强度。基于这项研究的结果，我们得出结论，等离子体暴露是一个有用的表面处理方法的牙科实践。
The purpose of this study was to investigate the effects on shear bond strength to resin after pure titanium (Ti) was exposed to plasma under different kinds of gas atmosphere. Polished Ti samples were treated using a plasma exposure apparatus in gas atmospheres of air, CO2, and C3F8. Surface analysis of Ti exposed to plasma was achieved through surface free energy and XPS measurements. The Ti sample was bonded with adhesive resin (4-META, MAC-10, HEMA, MDP, VBATDT) to a stainless steel piece. After which, shearing adhesion test was done. It was observed that plasma exposure in a specific gas atmosphere in regulated the bonding strength of titanium surface to resin. Based on the results of this study, we concluded that plasma exposure was a useful surface treatment method for dental practices.
对最新牙科陶瓷的粘合强度
DOI：
--
发表时间：
2019
期刊：
影响因子：
--
作者：
入江正郎 ;岡田正弘 ,武田宏明 ;鳥井康弘 ;吉原久美子 ，松本卓也
通讯作者：
吉原久美子 ，松本卓也
等离子处理对自固化修复树脂与亚克力义齿基托附着力的影响
DOI：
--
发表时间：
2004
期刊：
Dantel Materials Journal 23・4
影响因子：
--
作者：
Nishigawa;G.;Maruo;Y.;Oka;M.et al.(他4名)
通讯作者：
M.et al.(他4名)