Piston ring load carrying capacity: Influence of cross-hatching parameters

Piston ring load carrying capacity: Influence of cross-hatching parameters
复制标题

DOI：
10.1177/1350650114522779
复制
发表时间：
2012-10
期刊：
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
影响因子：
--
通讯作者：
H. Bouassida;N. Biboulet;P. Sainsot;A. Lubrecht
H. Bouassida;N. Biboulet;P. Sainsot;A. Lubrecht
中科院分区：
其他
文献类型：
--
作者：
H. Bouassida;N. Biboulet;P. Sainsot;A. Lubrecht

文献摘要

被引文献

相似文献

本文研究了交叉影线槽参数对模型活塞环承载能力的影响。通过改变所有参数（槽深、槽宽、槽角和交叉点之间的距离）进行了超过2000次瞬态计算，以获得平均承载能力。结果表明，当使用作为槽参数的组合的Δ参数时，承载能力结果接近于单个主曲线。最后，分析了饥饿程度对承载能力的影响。
This work studies the influence of the cross-hatching groove parameters on a model piston ring load carrying capacity. Over 2000 transient calculations were performed varying all parameters (groove depth, groove width, groove angle, and the distance between cross-overs) to obtain the average load carrying capacity. It is shown that the load carrying capacity results fall close to a single master curve when using the Δ parameter that is a combination of the groove parameters. Finally, the influence of the starvation level on load carrying capacity was analyzed.