Experimental study on the surface quality of the medical implants obtained by single point incremental forming
Experimental study on the surface quality of the medical implants obtained by single point incremental forming
复制标题
单点渐进成形医用植入物表面质量的实验研究
DOI：
10.1007/s12289-010-0922-x
复制
发表时间：
2010
影响因子：
2.4
通讯作者：
G. Racz
中科院分区：
文献类型：
--
作者：
V. Oleksik;A. Pascu;C. Deac;R. Fleacă;O. Bologa;G. Racz
对单点渐进成形技术用于膝关节股骨髁表面部分表面置换的医用植入物表面质量进行了实验研究。本文讨论了通过上述工艺获得的零件的粗糙度的测量，并强调了影响它的因素，考虑了冲头的初始粗糙度，冲头直径和冲头与坯料之间的摩擦系数。此外，确定了定义不同粗糙度参数的数学模型。
The paper presents a study based on the experimental research on the surface quality of the medical implants used for the partial resurfacing of the femoral condylar surface of the knee obtained by single point incremental forming process. The present paper discusses the measuring of the roughness of parts obtained through the previously mentioned process and highlights the factors that influence it. The initial roughness of the punch, the punch diameter, and the friction coefficient between the punch and the blank were considered. Also, the mathematical models that define different roughness parameters were determined.