Formation of TiN coatings by gas tunnel type plasma reactive spraying
Formation of TiN coatings by gas tunnel type plasma reactive spraying
复制标题
DOI：
10.1016/s0257-8972(00)00725-8
复制
发表时间：
2000-10-23
影响因子：
5.4
通讯作者：
Kobayashi, A
中科院分区：
文献类型：
--
作者：
Kobayashi, A
采用气体隧道式等离子体射流反应喷涂技术在短时间内制备了氮化钛（TiN）涂层。在这项研究中，这种方法的基本特征进行了研究，通过测量的TSI涂层上形成的横向不锈钢基板的性能。因此，在P = 25 kW，t = 5 s时，获得了150 μ m厚的TiN涂层，并对一些涂层性能进行了讨论。(C)2000 Elsevier Science S.A. All rights reserved.
The titanium nitride (TiN) coatings were formed by means of a reactive spraying using the gas tunnel type plasma jet in a short time operation. In this study, the fundamental characteristics of this method were investigated by measuring the properties of the TSI coatings formed on a traverse stainless steel substrate. Consequently, TiN coatings of 150 mum thickness were obtained at P = 25 kW, t = 5 s, and some coating properties were discussed. (C) 2000 Elsevier Science S.A. All rights reserved.