A new in situ method for the characterization of membranes in a wet state in the environmental scanning electron microscope
A new in situ method for the characterization of membranes in a wet state in the environmental scanning electron microscope
复制标题
DOI：
10.1016/j.memsci.2012.01.031
复制
发表时间：
2012-05-01
影响因子：
9.5
通讯作者：
Poelt, P.
中科院分区：
文献类型：
--
作者：
Reingruber, H.;Zankel, A.;Poelt, P.
This work presents a new microscopic method for the characterization of microfiltration membranes. It allows the direct observation of the behavior of water at the membrane surface during wetting and drying. For this purpose, an environmental scanning electron microscope (ESEM) was equipped with a special cooling stage, enabling the investigation of wet samples inside the microscope chamber. The images recorded from the membrane surfaces provide information about the number and size distribution of dry and wet pores during the drying process. Additional information about the wetting and drying of the membrane interior was gained by simultaneously measuring the temperature of both membrane surfaces as a function of time. The basic mechanism is the strong influence of the evaporation of cooled water from the membrane interior on the membrane surface temperature. These temperature characteristics reflect the interior membrane structure. The correlation between the microscopic parameters, obtained from the observation of the wetting and drying of the surface pores and the temperature characteristic, a macroscopic parameter, enables a qualitative description of the membrane structure. This information also allows the liquid and gas transport inside the complex membrane structure to be studied. In the present work two different types of flat microfiltration membranes were investigated. (c) 2012 Elsevier B.V. All rights reserved.
