Femtosecond VECSEL with tunable multi-gigahertz repetition rate.

Femtosecond VECSEL with tunable multi-gigahertz repetition rate.
复制标题

飞秒 VECSEL 具有可调谐的多千兆赫兹重复率。

DOI:
--
复制
发表时间:
2011
期刊:
影响因子:
3.8
通讯作者:
U. Keller
U. Keller
中科院分区:
物理与天体物理2区
文献类型:
--
作者:
O. Sieber;V. Wittwer;M. Mangold;M. Hoffmann;M. Golling;T. Südmeyer;U. Keller

文献摘要

参考文献

被引文献

相似文献

我们推出了一种飞秒垂直外腔表面发射激光器 (VECSEL),其重复率可在 6.5 GHz 至 11.3 GHz 范围内连续可调。使用低饱和注量半导体可饱和吸收镜 (SESAM) 可以通过简单的腔设计实现稳定的连续波锁模,SESAM 和 VECSEL 上的激光模式面积相似,并且不会因腔长度的变化而发生显着变化。在整个调谐范围内,无需对腔体进行任何重新对准,脉冲持续时间在 625 fs 左右几乎保持恒定,标准偏差小于 3.5%。中心波长在963.8 nm附近仅变化±0.2 nm,而输出功率为169 mW,标准偏差小于6%。这种可调谐重复率对于各种计量应用都很有趣,例如激光腔调谐光学采样(OSCAT)。
We present a femtosecond vertical external cavity surface emitting laser (VECSEL) that is continuously tunable in repetition rate from 6.5 GHz up to 11.3 GHz. The use of a low-saturation fluence semiconductor saturable absorber mirror (SESAM) enables stable cw modelocking with a simple cavity design, for which the laser mode area on SESAM and VECSEL are similar and do not significantly change for a variation in cavity length. Without any realignment of the cavity for the full tuning range, the pulse duration remained nearly constant around 625 fs with less than 3.5% standard deviation. The center wavelength only changed ±0.2 nm around 963.8 nm, while the output power was 169 mW with less than 6% standard deviation. Such a tunable repetition rate is interesting for various metrology applications such as optical sampling by laser cavity tuning (OSCAT).
发射 60 飞秒脉冲的被动锁模外腔半导体激光器
DOI: 10.1038/nphoton.2009.216
发表时间: 2009
期刊: Nature Photonics
影响因子: 35
作者:
Quarterman A
通讯作者: Quarterman A
可变重复频率飞秒脉冲表面发射半导体激光器
DOI: 10.1063/1.3644162
发表时间: 2011
影响因子: 4
作者:
Wilcox K
通讯作者: Wilcox K