CFD Modeling of Nucleation, Growth, Aggregation, and Breakage in Continuous Precipitation of Barium Sulfate in a Stirred Tank
CFD Modeling of Nucleation, Growth, Aggregation, and Breakage in Continuous Precipitation of Barium Sulfate in a Stirred Tank
复制标题
搅拌槽中硫酸钡连续沉淀过程中的成核、生长、聚集和破碎的 CFD 建模
DOI：
10.1021/ie9004282
复制
发表时间：
2009-08-05
影响因子：
4.2
通讯作者：
Zhao, Chengjun
中科院分区：
文献类型：
--
作者：
Cheng, Jingcai;Yang, Chao;Zhao, Chengjun
In this work, the precipitation of barium sulfate (BaSO(4)) in a continuous stirred tank reactor (CSTR) is modeled. The flow field is obtained through solving the single-phase Reynolds averaged Navier-Stokes equations with a standard single-phase k-epsilon turbulence model. The population balance equation is solved through the standard method of moments (SMM) and the quadrature method of moments (QMOM) both with and without aggregation and breakage terms. In the cases of precipitation simulation without aggregation and breakage, the results predicted from 2-node QMOM, 3-node QMOM, and SMM are very close. Thus, 2-node QMOM could replace SMM and be well-incorporated into an in-house CFD code to simulate the precipitation in CSTR with acceptable accuracy. The predicted area-averaged crystal size d(32) decreases almost linearly with increasing feed concentration, and the deviation from experimental data becomes significant at high feed concentration. Numerical simulation using 2-node QMOM with the Brownian motion and shear-induced aggregation kernels as well as a power-law breakage kernel indicates that the predicted d(32) shows good qualitative agreement with experimental results, and the quantitative agreement is achieved when the appropriate breakage rate equation is adopted.
