Improvement in the $J_{\rm c}-B$ Characteristics of Ex-Situ ${\rm MgB}_{2}$ Tape With SiC Addition
Improvement in the $J_{\rm c}-B$ Characteristics of Ex-Situ ${\rm MgB}_{2}$ Tape With SiC Addition
复制标题
添加 SiC 的异位 ${ m MgB}_{2}$ 胶带的 $J_{ m c}-B$ 特性得到改善
DOI:
10.1109/tasc.2007.899102
复制
发表时间:
2007
影响因子:
1.8
通讯作者:
H. Kumakura
中科院分区:
文献类型:
--
作者:
T. Nakane;H. Kitaguchi;A. Matsumoto;H. Kumakura
The utilization of MgB<sub>2</sub> powder obtained from the core of in-situ MgB<sub>2</sub> tape improves the high magnetic field J<sub>c</sub> - B performance of Fe-sheathed MgB<sub>2</sub> tape fabricated via an ex-situ powder-in-tube (PIT) technique. This work reveals a further improvement by means of the addition of SiC nano particle. The highest J<sub>c</sub> at 4.2 K of the tape have a values of 4.6 x 10<sup>3</sup> A/cm<sup>2</sup> (I<sub>c</sub> ap26 A at 12 T) and 9.7 x 10<sup>3</sup> A/cm<sup>2</sup> (I<sub>c</sub> ap 54 A at 10 T) for the tape with 10 mol% SiC post-annealed at 700deg C. These values are believed to be the highest known J<sub>c</sub> values of ex-situ MgB<sub>2</sub> tape. However, they were lower than the values of in-situ MgB<sub>2</sub> tape with 10 mol% SiC (J<sub>c</sub> 6.3 X 103 A/cm<sup>2</sup> ap 43 A at 12 T and 1.3 x 104 A/cm<sup>2</sup> : I<sub>c</sub> ap 88 A at 10 T). The reason for the poorer J<sub>c</sub> -B performance of the ex-situ MgB<sub>2</sub> tape is thought to be due to a lower B<sub>irr</sub> and poorer grain connectivity.
DOI:
--
发表时间:
2006
期刊:
Supercond. Sci. Technol. Vol. 19
影响因子:
--
作者:
H. Yamada;M. Hirakawa;H. Kumakura;H. Kitaguchi
通讯作者:
H. Kitaguchi
影响因子:
4
作者:
Dou, SX;Soltanian, S;Tomsic, M
通讯作者:
Tomsic, M