Six-Axis Controlled Ultrasonic Vibration Cutting in Fabrication of a Sharp Corner
Six-Axis Controlled Ultrasonic Vibration Cutting in Fabrication of a Sharp Corner
复制标题
六轴控制超声振动切割尖角加工
DOI：
10.1007/s00170-002-1344-9
复制
发表时间：
2003
期刊：
影响因子：
--
通讯作者：
Y. Takeuchi
中科院分区：
文献类型：
--
作者：
F. H. Japitana;K. Morishige;Y. Takeuchi
一次完成加工可实现高精度和高质量。由于普通加工不能制造尖角，因此使用放电加工（EDM）。然而，这需要一个高度熟练的机械师来设置工件，以保持产品的精度，因为在这个过程中涉及两个或更多的设置。在这项研究中，一种新的制造方法的制造尖角进行了实验研究。在此方法中应用了超声振动的六轴联动控制切削。实验结果表明，该方法在尖角加工中是可行的。
The completion of machining in one setting leads to high accuracy and quality. Since ordinary machining is not capable of fabricating sharp corners, electrical discharge machining (EDM) is used. However, this requires a highly skilled machinist to set up the workpiece to maintain the accuracy of the product since two or more set-ups are involved in this process. In this study, a new manufacturing method for the fabrication of sharp corners is examined experimentally. Six-axis controlled cutting using a bore byte tool with the application of ultrasonic vibration has been applied in this method. Experimental resultshave shown the applicability of this method in the fabrication of sharp corners.