A High Performance HTS Filter Subsystem for CDMA

A High Performance HTS Filter Subsystem for CDMA
复制标题

DOI:
--
复制
发表时间:
2004-08
影响因子:
5
通讯作者:
X. Guo;B. Cao;B. Wei;X. Zhang;Z. Yin;W. He;S. He;L. Gao;M. Zhu;B. Gao;B. A. Aminov-B.
X. Guo;B. Cao;B. Wei;X. Zhang;Z. Yin;W. He;S. He;L. Gao;M. Zhu;B. Gao;B. A. Aminov-B.
中科院分区:
物理与天体物理3区
文献类型:
--
作者:
X. Guo;B. Cao;B. Wei;X. Zhang;Z. Yin;W. He;S. He;L. Gao;M. Zhu;B. Gao;B. A. Aminov-B.

文献摘要

被引文献

相似文献

我们设计并制作了一个用于CDMA移动的通信的16极高温超导滤波器,在830 MHz处具有1.2%的分数带宽。在本文中,我们描述的设计,测试过程和所获得的结果。该滤波器制作在46 mm × 29 mm × 0.43mm的蓝宝石衬底上,衬底两侧镀有YBCO薄膜。在70 K温度下,滤波器的带内插入损耗小于0.29dB,带外抑制优于70 dB,带边陡度大于40 dB/MHz。我们还制作和测试了一个高温超导子系统,它包括16极高温超导滤波器,低噪声放大器(LNA)和斯特林冷却器。冷却至70 K时,高温超导子系统的噪声系数为0.75 dB,驻波比为1.5,增益为21.5 dB。
We designed and fabricated a 16-pole high temperature superconducting (HTS) filter with a 1.2% fractional bandwidth at 830 MHz for CDMA mobile communications. In this paper we describe the design, the test procedure and the obtained results. The filter was fabricated on a 46mm×29mm×0.43 mm sapphire substrate which was double side coated with YBCO thin films. At a temperature of 70 K, the in-band insertion loss of the filter is less than 0.29 dB, its out-of-band rejection is better than 70 dB and the steepness of the band edges is larger than 40dB/MHz. We also fabricated and tested a HTS subsystem, which consists of the 16-pole HTS filter, a low noise amplifier (LNA) and a Stirling Cooler. Cooled down to 70 K, the HTS subsystem shows a good performance of 0.75 dB noise figure and 1.5 voltage standing wave ratio (VSWR) with 21.5 dB gain.