Influence of temperature field on the microstructure of low carbon microalloyed ferrite–bainite dual-phase steel during heat treatment
Influence of temperature field on the microstructure of low carbon microalloyed ferrite–bainite dual-phase steel during heat treatment
复制标题
DOI：
10.1016/j.msea.2011.12.090
复制
发表时间：
2012-02
期刊：
影响因子：
6.4
通讯作者：
Shaopeng Qu;Yucheng Zhang;Xiaolu Pang;K. Gao
中科院分区：
文献类型：
--
作者：
Shaopeng Qu;Yucheng Zhang;Xiaolu Pang;K. Gao
To investigate the quantitative relation between the temperature and the microstructure of low carbon steel, the low carbon microalloyed ferrite–bainite dual-phase (FBDP) steel was prepared by heat treatment. On a series of positions chosen in the sample which was cut from the treated FBDP steel, the volume fractions of bainite in the microstructures were measured and the corresponding temperatures were also obtained through the finite element method. The results show that not only the volume fraction of bainite increases linearly, but also the size of bainite increases with the increase of the outset water-cooling temperature. In addition, by comprehensively evaluating the microstructure and the temperature, it can be estimated that the lowest bainite formation temperature for this steel is about 550°C, which had been proved by the experiment.
