Efficient polymer photovoltaic cells using solution-processed MoO3 as anode buffer layer
Efficient polymer photovoltaic cells using solution-processed MoO3 as anode buffer layer
复制标题
使用溶液处理的MoO3作为阳极缓冲层的高效聚合物光伏电池
DOI：
10.1016/j.solmat.2010.01.004
复制
发表时间：
2010-05-01
影响因子：
6.9
通讯作者：
Xie, Zhiyuan
中科院分区：
文献类型：
--
作者：
Liu, Fengmin;Shao, Shuyan;Xie, Zhiyuan
以溶液处理的氧化钼(MoO_3)为阳极缓冲层，制备了基于区域规整聚3-己基噻吩基(P3HT)富勒烯衍生物[6，6]-苯基-C-61丁酸甲酯(PC61BM)复合材料的高效光伏电池。研究了溶液处理的MoO_3阳极缓冲层对P3HT：PCBM光伏电池性能的影响，并与具有不同阳极缓冲层的光伏电池进行了比较，其中包括水溶性poly(ethylenedioxythiophene)：poly(styrenesulfonate)(PEDOT：PSS)和热蒸发MoO_3。研究发现，采用溶液处理的MoO_3阳极缓冲层的光伏电池的性能与采用PEDOT：PSS或热蒸发MoO_3作为阳极缓冲层的光伏电池的性能相当或更高。在AM1.5G 100 mW/cm(2)光照下，采用溶液处理的MoO_3阳极缓冲层的光伏电池的功率转换效率达到3.14%。(C)2010爱思唯尔B.V.保留所有权利。
Efficient photovoltaic (PV) cells based on regioregular poly(3-hexylthiophene) (P3HT):fullerene derivative [6,6]-phenyl-C-61 butyric acid methyl ester (PC61BM) composites have been fabricated by using solution-processed molybdenum oxide (MoO3) as an anode buffer layer. The influence of solution-processed MoO3 anode buffer layer on the device performance of P3HT:PCBM PV cells is investigated as compared to the PV cells with different anode buffer layers including water-soluble poly(ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and the thermally evaporated MoO3. It is found that the performance of the PV cell with solution-processed MoO3 anode buffer layer is comparable or higher than the devices using PEDOT:PSS or thermally evaporated MoO3 as the anode buffer layer. The power conversion efficiency of PV cell with solution-processed MoO3 anode buffer layer reaches 3.14% under AM1.5G 100 mW/cm(2) illumination. (C) 2010 Elsevier B.V. All rights reserved.