Crystallography facet tailoring of carbon doped ZnO nanorods via selective etching

Crystallography facet tailoring of carbon doped ZnO nanorods via selective etching
复制标题

通过选择性蚀刻对碳掺杂 ZnO 纳米棒进行晶体学刻面定制

DOI:
10.1016/j.apsusc.2017.02.119
复制
发表时间:
2017-06
影响因子:
6.7
通讯作者:
Wu Yelong
Wu Yelong
中科院分区:
材料科学1区
文献类型:
--
作者:
Duan Xiangyang;Chen Guangde;Gao Peihong;Jin Wentao;Ma Xiaoman;Yin Yuan;Guo Lu'an;Ye Honggang;Zhu Youzhang;Yu Jinying;Wu Yelong

文献摘要

参考文献

被引文献

相似文献

利用水热法成功地合成了具有标准六棱柱形状的碳掺杂氧化锌纳米棒。为了通过调整表面来改变它们的光催化活性,在氨气氛下使用后蚀刻工艺,并且这些纳米棒可以转化为六边形多孔纳米棒(在750° C下),以及具有由交替的(11 2 <$1)和(11 2 <$1 <$)平面覆盖的波纹表面结构的多孔纳米棒(在850° C和950° C下)。利用能量色散谱和拉曼谱研究了掺杂碳物种的浓度和振动模式。它明确地表明,在750° C左右存在碳酸化过程,并且一些有机醛分子转化为片状形式的碳。通过对它们的光致发光谱和光催化活性的研究,我们发现合适的刻蚀温度是获得高光催化性能的关键。
Using a facile hydrothermal method, we have successfully synthesized carbon doped (C-doped) ZnO nanorods with standard hexagonal column shapes. To modify their photocatalytic activities by tailoring the surfaces, a post etching process under ammonia atmosphere was used, and these nanorods could be converted into hexagonal porous nanorods (at 750° C), and porous nanorods with corrugated surface structures covered by alternant (11 2¯ 1) and (11 2¯ 1¯) planes (at 850° C and 950° C). Energy Dispersion Spectrum and Raman spectra are used to carefully study the concentration and vibration modes of the doped carbon species. It explicitly shows that there is a carbonation process around 750° C and some organic aldehyde molecules transform into carbon with flake form. After investigating their photoluminescence spectra and photocatalytic activities, we conclude that an appropriate etching temperature is the key point to obtain high photocatalytic performance.
DOI: 10.1039/c3ta14085g
发表时间: 2014
影响因子: --
作者:
Y. Wen;Rao Huang;Xiang-Ming Zeng;G. Shao;Shigang Sun
通讯作者: Y. Wen;Rao Huang;Xiang-Ming Zeng;G. Shao;Shigang Sun
DOI: 10.1103/physrevb.86.155205
发表时间: 2012-10
期刊: Physical Review B
影响因子: 3.7
作者:
Yelong Wu;Guangde Chen;S. Wei;M. Al‐Jassim;Yanfa Yan
通讯作者: Yelong Wu;Guangde Chen;S. Wei;M. Al‐Jassim;Yanfa Yan
通过选择性化学蚀刻方法将 ZnO 纳米棒表面定制为波纹纳米棒
DOI: 10.1088/0957-4484/27/29/295601
发表时间: 2016-06
期刊: NANOTECHNOLOGY
影响因子: 3.5
作者:
Duan Xiangyang;Chen Guangde;Li Chu;Yin Yuan;Jin Wentao;Guo Lu'an;Ye Honggang;Zhu Youzhang;Wu Yelong
通讯作者: Wu Yelong
DOI: 10.1002/pssa.200779442
发表时间: 2008-10
期刊: physica status solidi (a)
影响因子: --
作者:
D. Ramírez;P. Bartlett;M. Abdelsalam;H. Gómez;D. Lincot
通讯作者: D. Ramírez;P. Bartlett;M. Abdelsalam;H. Gómez;D. Lincot
DOI: 10.1039/c0nr00560f
发表时间: 2011-01-01
期刊: NANOSCALE
影响因子: 6.7
作者:
Gurlo, Aleksander
通讯作者: Gurlo, Aleksander