Future gear metrology based on areal measurements and improved holistic evaluations
Future gear metrology based on areal measurements and improved holistic evaluations
复制标题
DOI：
10.1016/j.cirp.2017.04.046
复制
发表时间：
2017-01-01
影响因子：
4.1
通讯作者：
Guenther, Anke
中科院分区：
文献类型：
--
作者：
Goch, Gert;Ni, Kang;Guenther, Anke
当今圆柱齿轮计量面临的三个主要挑战是：对齿轮几何形状整体信息的需求不断增加；侧面修正的种类和使用不断增加；以及改进的制造过程反馈。本文分析了这些挑战的后果。它们需要在传感硬件（触觉与光学）、测量策略（面向线与面向区域）和评估方法方面对齿轮计量进行范式改变。后者包括对广泛使用的齿轮偏差和修正参数（例如f(alpha)、F-beta、F-P、C-H alpha、C-beta）的修订和更新以及切比雪夫多项式的有效确定。分析了模拟和测量的齿轮数据，并提出了一套修订的齿轮偏差和修改参数的建议。 (C) 2017 年由 Elsevier Ltd 代表 CIRP 发布。
Three existing major challenges in today's cylindrical gear metrology are: an increased need of holistic information on gear geometry; an increasing variety and use of flank modifications; and an improved feedback to the manufacturing process. This paper analyses the consequences of these challenges. They require a paradigm change in gear metrology concerning the sensing hardware (tactile vs. optical), measuring strategies (line oriented vs. area oriented), and evaluation methods. The latter includes a revision and update of the widely used gear deviation and modification parameters (e.g. f(alpha), F-beta, F-P, C-H alpha, C-beta) and their effective determination by Chebyshev polynomials. Simulated and measured gear data are analyzed and a proposal for a revised set of gear deviation and modification parameters is presented. (C) 2017 Published by Elsevier Ltd on behalf of CIRP.