End-to-end simulation of the C-ADS Injector II with a 3-D field map
End-to-end simulation of the C-ADS Injector II with a 3-D field map
复制标题
DOI：
10.1088/1674-1137/37/4/047003
复制
发表时间：
2013-04
影响因子：
3.6
通讯作者：
Zhi-jun Wang;Yuan He;Wang-sheng Wang-Wang-sheng-Wang-51456435;Shuhui Liu;H. Jia;C. Li;Xianbo Xu;Ximeng Chen
中科院分区：
文献类型：
--
作者：
Zhi-jun Wang;Yuan He;Wang-sheng Wang-Wang-sheng-Wang-51456435;Shuhui Liu;H. Jia;C. Li;Xianbo Xu;Ximeng Chen
注入器II是中国加速器驱动系统（C-ADS）项目强流超导质子驱动直线加速器的两个并联注入器之一，正在由近代物理研究所设计和建造。目前，该喷油器的设计工作已基本完成。利用TRACK多粒子模拟程序进行了端到端的模拟，以检查每个加速段与喷射器整体性能之间的匹配。此外，多粒子模拟与各种错误和失调已被执行，以定义每个设备的要求。仿真结果表明，格型设计是鲁棒的。文中给出了端到端仿真和误差仿真的结果。
The Injector II, one of the two parallel injectors of the high-current superconducting proton driver linac for the China Accelerator-Driven System (C-ADS) project, is being designed and constructed by the Institute of Modern Physics. At present, the design work for the injector is almost finished. End-to-end simulation has been carried out using the TRACK multiparticle simulation code to check the match between each acceleration section and the performance of the injector as a whole. Moreover, multiparticle simulations with all kinds of errors and misalignments have been performed to define the requirements of each device. The simulation results indicate that the lattice design is robust. In this paper, the results of end-to-end simulation and error simulation with a 3-D field map are presented.