Preparation of non-contact ordered array of polystyrene colloidal particles by using a metallic thin film of fused hemispheres
Preparation of non-contact ordered array of polystyrene colloidal particles by using a metallic thin film of fused hemispheres
复制标题
DOI：
10.1016/j.colsurfa.2008.07.030
复制
发表时间：
2008-12-01
影响因子：
5.2
通讯作者：
Nakane, Michiharu
中科院分区：
文献类型：
--
作者：
Koide, Yoshihiro;Fujisawa, Kei;Nakane, Michiharu
薄的金属双层由直径为930 nm的熔融中空半球组成，通过溅射沉积Ti和Fe分别在50和5 nm的厚度，到球形聚苯乙烯胶体颗粒的阵列上来制造。熔融金属半球被用来组装的聚苯乙烯胶体颗粒的较小直径（800 nm）的非接触的二维周期性阵列，通过捕获它们在金属威尔斯。(C)2008 Elsevier B.V.保留所有权利。
A thin metallic bilayer consists of fused hollow hemispheres of 930 nm in diameter is fabricated by sputter deposition of Ti and Fe at 50 and 5 nm of thickness, respectively, onto an array of spherical polystyrene colloidal particles. The fused metal hemispheres are utilized to assemble polystyrene colloidal particles of smaller diameters (800 nm) into non-contact two-dimensional periodic array by trapping them in the metallic wells. (C) 2008 Elsevier B.V. All rights reserved.