Fabrication of a widely tunable fiber Bragg grating filter using fused deposition modeling 3D printing
Fabrication of a widely tunable fiber Bragg grating filter using fused deposition modeling 3D printing
复制标题
DOI：
10.1364/ome.9.004409
复制
发表时间：
2019-11-01
影响因子：
2.8
通讯作者：
Fokine, Michael
中科院分区：
文献类型：
--
作者：
Liu, Chunxin;Yang, Xiong;Fokine, Michael
使用3D打印设计一个简单的波长可调谐器件的基础上光纤布拉格光栅演示。利用熔融沉积成型（FDM）技术，将光纤光栅嵌入到聚对苯二甲酸乙二醇酯（PETG）光束中。通过弯曲，导致光纤的压缩或拉伸，布拉格波长可以在60 nm的范围内连续调谐，保持反射率和3 dB线宽。(C)根据OSA开放获取出版协议的条款，2019年美国光学学会
The use of 3D-printing for designing a simple wavelength tunable device based on fiber Bragg gratings is demonstrated. Using fused deposition modeling (FDM), the fiber Bragg grating is embedded into a beam of polyethylene terephthalate glycol (PETG). Through bending, resulting in compression or tension of the optical fiber, the Bragg wavelength could be continuously tuned over a range of 60 nm, with maintained reflectivity and 3-dB linewidth. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement