Straightness evaluation using inclinometers with a pair of offset bars
Straightness evaluation using inclinometers with a pair of offset bars
复制标题
DOI：
10.1016/j.precisioneng.2014.08.006
复制
发表时间：
2015
影响因子：
3.6
通讯作者：
T. Kume;M. Satoh;T. Suwada;Kazuro Furukawa;E. Okuyama
中科院分区：
文献类型：
--
作者：
T. Kume;M. Satoh;T. Suwada;Kazuro Furukawa;E. Okuyama
To evaluate the straightness of large objects, the use of an inclinometer is advantageous because it requires neither straight shape references nor transferring mechanisms. Herein, we consider adopting it for precise (with greater accuracy than 1 mm) evaluation of the straightness of linear particle accelerators (linacs) that are several hundred meters long or longer. In this study, the straightness evaluation of a 206-m-long part of the KEK injector linac was demonstrated using inclinometers with a pair of cantilevers called offset bars. The offset bars were adopted to extend the evaluation length by avoiding obstacles that block the evaluation path. Errors caused by the offset bars can be eliminated by reversal measurement considering the slope angles of the offset bars. The derived straightness corresponded with those derived by an alignment telescope and a laser-based alignment system within several millimeters and partly within several hundred micrometers. The reproducibility of slope angles for an arbitrary measurement point was 15 μrad at standard deviation. This corresponds to a standard deviation of 0.47 mm for straightness, with a total evaluation length of 500 m and measurement intervals of 2 m. The results indicate that our newly devised method is applicable for evaluating the straightness.
