Porous Adsorption Materials for Carbon Dioxide Capture in Industrial Flue Gas.

Porous Adsorption Materials for Carbon Dioxide Capture in Industrial Flue Gas.
复制标题

DOI:
10.3389/fchem.2022.939701
复制
发表时间:
2022
影响因子:
5.5
通讯作者:
--
中科院分区:
化学3区
文献类型:
--
作者:

文献摘要

参考文献

被引文献

相似文献

随着温室效应的加剧和对CO2资源利用的重视,CO2的富集与分离已成为当前环境与能源领域的研究热点。与其他技术相比,变压吸附具有成本低、效率高的优点,得到了广泛的应用。高效吸附剂的设计与制备是变压吸附技术的核心。因此,高性能的多孔CO2吸附材料越来越受到人们的关注。具有高比表面积、高CO2吸附能力、低再生能、良好循环性能、抗湿性等特点的多孔吸附材料一直是人们关注的焦点。本文综述了多孔吸附材料对CO2吸附性能的优化,并将其应用于CO2吸附领域。讨论了多孔吸附剂的孔结构、表面化学和CO2吸附性能之间的内在规律。展望了多孔吸附材料在工业废气CO2处理中的进一步发展要求和研究重点。多孔碳吸附材料的结构设计仍然是当前的研究热点。随着应用和环境条件的要求,需要满足高性能材料的完整性、机械强度和耐水性。
Due to the intensification of the greenhouse effect and the emphasis on the utilization of CO2 resources, the enrichment and separation of CO2 have become a current research focus in the environment and energy. Compared with other technologies, pressure swing adsorption has the advantages of low cost and high efficiency and has been widely used. The design and preparation of high-efficiency adsorbents is the core of the pressure swing adsorption technology. Therefore, high-performance porous CO2 adsorption materials have attracted increasing attention. Porous adsorption materials with high specific surface area, high CO2 adsorption capacity, low regeneration energy, good cycle performance, and moisture resistance have been focused on. This article summarizes the optimization of CO2 adsorption by porous adsorption materials and then applies them to the field of CO2 adsorption. The internal laws between the pore structure, surface chemistry, and CO2 adsorption performance of porous adsorbent materials are discussed. Further development requirements and research focus on porous adsorbent materials for CO2 treatment in industrial waste gas are prospected. The structural design of porous carbon adsorption materials is still the current research focus. With the requirements of applications and environmental conditions, the integrity, mechanical strength and water resistance of high-performance materials need to be met.
DOI: 10.1038/ncomms12640
发表时间: 2016-08-30
影响因子: 16.6
作者:
Choi, Woosung;Min, Kyungmin;Kim, Chaehoon;Ko, Young Soo;Jeon, JaeWan;Seo, Hwimin;Park, Yong-Ki;Choi, Minkee
通讯作者: Choi, Minkee
DOI: 10.1038/s41467-020-15036-y
发表时间: 2020-03-05
影响因子: 16.6
作者:
Chanut, Nicolas;Ghoufi, Aziz;Llewellyn, Philip L.
通讯作者: Llewellyn, Philip L.
DOI: 10.1021/ja8036096
发表时间: 2008-08-20
影响因子: 15
作者:
Caskey, Stephen R.;Wong-Foy, Antek G.;Matzger, Adam J.
通讯作者: Matzger, Adam J.
DOI: 10.1126/science.aaf6323
发表时间: 2016-07-08
期刊: SCIENCE
影响因子: 56.9
作者:
Cadiau, A.;Adil, K.;Eddaoudi, M.
通讯作者: Eddaoudi, M.
DOI: 10.1126/science.283.5405.1148
发表时间: 1999-02-19
期刊: SCIENCE
影响因子: 56.9
作者:
Chui, SSY;Lo, SMF;Williams, ID
通讯作者: Williams, ID