The design of iron-chromium-nickel alloys for use at high temperatures
The design of iron-chromium-nickel alloys for use at high temperatures
复制标题
DOI：
10.1007/bf00609924
复制
发表时间：
1969-03
影响因子：
2.2
通讯作者：
J. Croll;G. Wallwork
中科院分区：
文献类型：
--
作者：
J. Croll;G. Wallwork
在高温下使用的铁铬镍合金的设计应该基于对合金成分的了解，这些成分会产生氧化铬垢。为此，在1000°C氧化条件下研究了镍-铬和铁-铬-镍合金系统，并确定了镍-铬-氧和铁-铬-镍-氧平衡图的等温截面。在这些测定的基础上，推荐了几种三元组合物作为最适合形成用于氧化环境的高温合金的基础。
The design of iron-chromium-nickel alloys for use at high temperatures ought to be based on a knowledge of the alloy compositions that will give rise to a chromic oxide scale. For this reason, the nickel-chromium and iron-chromium-nickel alloy systems have been investigated at 1000°C under oxidizing conditions, and the isothermal sections of the nickel-chromium-oxygen and the iron-chromium-nickel-oxygen equilibrium diagrams have been determined. On the basis of these determinations, several ternary compositions are recommended as being the most suitable to form the basis of high-temperature alloys for use in oxidizing environments.