Experimental study of a personal cooling system integrated with phase change material
Experimental study of a personal cooling system integrated with phase change material
复制标题
DOI：
10.1016/j.applthermaleng.2020.115026
复制
发表时间：
2020-04
影响因子：
6.4
通讯作者：
Y. Qiao;T. Cao;J. Muehlbauer;Y. Hwang;R. Radermacher
中科院分区：
文献类型：
--
作者：
Y. Qiao;T. Cao;J. Muehlbauer;Y. Hwang;R. Radermacher
Personal cooling is attracting more attention recently because they focus on conditioning the micro-environment around occupants rather than the entire building space, leading to building energy savings while satisfying thermal comfort. In this study, a novel portable personal cooling system integrated with phase change material (PCM) for active thermal storage was investigated. A PCM embedded in a graphite matrix is integrated into the condenser of the vapor compression cycle while an evaporator provides the localized cooling. The vapor compression cycle is operated in a reverse cycle for the regeneration of PCM. The effects of the thermostat setting, PCM recharge rates, and cooling time on system performance were experimentally studied. Results show that the personal cooling system can provide a cooling capacity of 160 W for 4.5 h, the increase in thermostat setting can lead to higher cooling capacity, and the increase in cooling time leads to fast coefficient of performance degradation in both cycles. Besides, the higher compressor speed is recommended to reduce recharge time and increase the overall coefficient of performance.
