WEAR OF COMBINATIONS OF ACRYLIC RESIN AND PORCELAIN, ON AN ABRASION TESTING MACHINE
WEAR OF COMBINATIONS OF ACRYLIC RESIN AND PORCELAIN, ON AN ABRASION TESTING MACHINE
复制标题
DOI：
10.1111/j.1365-2842.1978.tb01202.x
复制
发表时间：
1978-01-01
影响因子：
2.9
通讯作者：
HARRISON, A
中科院分区：
文献类型：
--
作者：
HARRISON, A
通过模拟人类咀嚼循环中所遇到的载荷、滑动距离和接触次数，在与咀嚼功能相似的条件下测试材料，利用机器对丙烯酸树脂和陶瓷的各种组合进行了磨损试验。结果表明，两种材料复合磨损的磨损量取决于周围介质的性质和相对材料的表面粗糙度。丙烯酸树脂表现出良好的耐磨性，如果没有第三方磨料或对立的坚硬，粗糙的表面存在。当在系统中加入温和的磨料时，丙烯酸树脂对丙烯酸树脂组合的磨损几乎是瓷器对瓷器的七倍。临床经验表明，这是一种合理合理的佩戴顺序。
Wear tests of various combinations of acrylic resin and porcelain were made using a machine which was designed to test materials under conditions similar to those of masticatory function by simulating the loads, sliding distances, and contact times encountered in the human masticatory cycle. The results showed that the amount of wear of the two materials worn in combination depended on the nature of the surrounding medium and on the surface roughness of the opposing material. Acrylic resin showed good wear resistance provided no third party abrasive or opposing hard, rough surface was present. When a mild abrasive was incorporated in the system, the acrylic resin vs acrylic resin combination wore almost seven times more than porcelain vs porcelain. Clinical experience would suggest that this is a reasonably sound order of wear.