Fabrication of Superhydrophobic Mg/Al Layered Double Hydroxide (LDH) Coatings on Medium Density Fiberboards (MDFs) with Flame Retardancy.

Fabrication of Superhydrophobic Mg/Al Layered Double Hydroxide (LDH) Coatings on Medium Density Fiberboards (MDFs) with Flame Retardancy.
复制标题

DOI:
10.3390/ma11071113
复制
发表时间:
2018-06-29
期刊:
Materials (Basel, Switzerland)
影响因子:
--
通讯作者:
Jin C
Jin C
中科院分区:
其他
文献类型:
--
作者:
Wang Z;Shen X;Qian T;Xu K;Sun Q;Jin C

文献摘要

参考文献

被引文献

相似文献

纤维板的亲水性和易燃性限制了其实际应用。本研究以中密度纤维板(MDF)为基材,探索了一种制备具有超疏水性和阻燃性的多功能涂料的方法。采用聚二甲基硅氧烷(PDMS)和1H,1H,2 H,2 H-全氟癸基三氯硅烷(FDTS)改性的层状双氢氧化镁(LDH)颗粒,在玻璃表面分步沉积得到超疏水阻燃涂层。所制备的涂层具有超疏水性能,水接触角(WCA)约为155°,并具有良好的自清洁性能。此外,极限氧指数(LOI)值的超疏水MDFs增加了60.4%相比,原始MDFs,表现出改善的阻燃性。经PDMS@ FDTS-Mg/Al LDH包覆后,MDFs的峰值热释放速率(PHRR)和总热释放速率(THR)降低,表明超疏水涂层降低了MDFs的火灾增长速度和火灾危险性。这种具有多种功能的涂层为MDFs的保护和功能化开辟了新的途径。
The hydrophilicity and flammability of fiberboards have limited their real-life applications. In this study, a facile strategy for preparing the multifunctional coatings with superhydrophobicity and flame retardancy on medium density fiberboards (MDFs) has been investigated. The superhydrophobic and flame-retardant coating on the MDF surface was obtained by depositing polydimethylsiloxane (PDMS) and 1H, 1H, 2H, 2H-perfluorodecyltrichlorosilane (FDTS)-modified Mg/Al layered double hydroxide (LDH) particles step by step. The as-prepared coating exhibited superhydrophobic properties with a water contact angle (WCA) of ~155° and good self-cleaning properties. Furthermore, the limiting oxygen index (LOI) value of the superhydrophobic MDFs increased by 60.4% as compared to that of the pristine MDFs, showing improved flame retardancy. The peak heat release rate (PHRR) and total heat release (THR) of MDFs decreased after coating with PDMS@FDTS-Mg/Al LDH, suggesting that the superhydrophobic coating decreased the fire growth speed and risk of fire hazard of MDFs. This coating with multiple functions opens a new avenue for the protection and functionalization of MDFs.
DOI: 10.1016/j.desal.2017.02.022
发表时间: 2017-07-01
期刊: DESALINATION
影响因子: 9.9
作者:
Lu, Xuemei;Peng, Yuelian;Ge, Lei
通讯作者: Ge, Lei
DOI: 10.1016/j.biortech.2005.01.023
发表时间: 2005-11-01
影响因子: 11.4
作者:
Hashim, R;How, LS;Sulaiman, O
通讯作者: Sulaiman, O
DOI: 10.1016/j.matdes.2015.12.140
发表时间: 2016-03-05
期刊: MATERIALS & DESIGN
影响因子: 8.4
作者:
Carosio, F.;Cuttica, F.;Berglund, L. A.
通讯作者: Berglund, L. A.
DOI: 10.1016/j.apsusc.2014.10.146
发表时间: 2015-01-01
影响因子: 6.7
作者:
Pan, Zihe;Shahsavan, Hamed;Zhao, Boxin
通讯作者: Zhao, Boxin
DOI: 10.1021/acssuschemeng.6b00691
发表时间: 2016-07-01
影响因子: 8.4
作者:
Chen, Tingjie;Xie, Yongqun;Lin, Ming
通讯作者: Lin, Ming