Enhancing impurities removal from Si by controlling crystal growth in directional solidification refining with Al-Si alloy
Enhancing impurities removal from Si by controlling crystal growth in directional solidification refining with Al-Si alloy
复制标题
DOI：
10.1016/j.jallcom.2019.153300
复制
发表时间：
2019
影响因子：
6.2
通讯作者：
Wenhui Ma
中科院分区：
文献类型：
--
作者：
Guoyu Qian;Liyuan Sun;Hang Chen;Zhi Wang;Kuixian Wei;Wenhui Ma
In this paper, the principle of “plain materials” was attempted to advancing silicon (Si) purity, i.e., controlling solid-liquid interface and Si crystal growth pattern to enhance impurities removal from Si in directional solidification refining with Al-Si alloy. The relationship between Si crystal growth and impurity removal was established, and it was found that the removal ratio of metal impurities (less than 95% to more than 99%) gradually decreased with the order evolution of Si crystal from bulk Si, porous Si, acicular Si to Al-Si eutectic alloy. More than 99.5% of metallic impurities could be removed in the case of bulk silicon. However, the removal of boron (B) and phosphorus (P) showed the opposite trend. According to the principle of constitutional supercooling, the crystal Si growth and interface morphology were evaluated based on the conservation of mass of silicon atoms at the solidification interface, which was also used to explain the mechanism of impurities removal. Control of silicon crystal growth was achieved by changing the temperature gradient (lowering rate), Si alloy composition (Si content) and the heat transfer mode of solid-liquid interface that was expressed in terms of the effective heat transfer area ratio between wall and bottom of crucible (LA). A more stable and flat liquid-solid interface and 45% bulk Si was obtained at a lowering rate of 0.05 mm/min when the value of LA was 0.1, which can greatly enhance the removal of impurities.
