3D GIS, where are we standing?
3D GIS, where are we standing?
复制标题
DOI：
--
复制
发表时间：
2003
期刊：
影响因子：
--
通讯作者：
J. Stoter;S. Zlatanova
中科院分区：
文献类型：
--
作者：
J. Stoter;S. Zlatanova
1. Introduction Since early '90 GIS has become a sophisticated system for maintaining and analysing spatial and thematic information on spatial objects. The need for 3D information is rapidly increasing. 2D GIS analysis has shown its limitations in some situations, e.g. noise prediction models (noise spreads out in three dimensions) (Kluijver and Stoter, 2003), water flood models, air pollution models, geological models (Van Wees, 2002), real estate market (CEUS, 2003; Stoter and Ploeger, 2003). Other disciplines that have met the need for 3D geo-information are: 3D urban planning, environmental monitoring, telecommunications, public rescue operations, landscape planning. The breakthrough of 3D GIS seems to go slow. The developments in the area of 3D GIS are pushed by a growing need for 3D information from one side and new technologies on the other side. In (Zlatanova et al., 2002) the side of new technologies were addressed by discussing the current status of 3D GIS considering developments reported by vendors and researchers. In VI Matrix (a Dutch magazine for real estate) the developments of 3D GIS in the Netherlands were described (Oosterom et al., 2002 (1); Oosterom et al., 2002 (2)). This paper continues on these discussions and gives an extended overview on the status of 3D GIS in both research and practise. We start with a description of technology developments in 3D GIS. Then we address the main complexities of 3D GIS: organisation of 3D data, 3D object reconstruction, and visualisation and navigation in 3D environments. 3D analysing and 3D editing can be added to this list. More on 3D analysing can be found in (Zlatanova and Stoter, 2003). An example of the implementation of a specific 3D analysis, 3D buffering, is described in (De Vries, 2001). More on 3D editing can be found in (Stoter and Zlatanova, 2003). We end this paper with a discussion on where to go for a serious breakthrough of 3D GIS. 2. Technology progress An important development is improvement of 3D data collection techniques (aerial and close range photogrammetry, airborne or ground based laser scanning, surveying and GPS). Sensors are faster and more accurate than before. Other new techniques that push 3D GIS developments are hardware developments: processors, memory and disk space devices have become more efficient in processing large data sets, especially graphics cards also used by gaming industry. Furthermore elaborated tools to display and interact with 3D data are evolving. GIS software-tools have also …
