Assembly and electrical tests of the first full-size forward module for the ATLAS ITk Strip detector
Assembly and electrical tests of the first full-size forward module for the ATLAS ITk Strip detector
复制标题
ATLAS ITk Strip 探测器的第一个全尺寸前向模块的组装和电气测试
DOI：
10.1016/j.nima.2018.09.082
复制
发表时间：
2019
期刊：
影响因子：
--
通讯作者：
Argos C
中科院分区：
文献类型：
--
作者：
Argos C
ATLAS实验将用一个名为内部跟踪器（ITk）的全硅探测器取代现有的内部探测器，用于高亮度LHC升级。在ITk的外部区域是条带检测器，其由四层桶和桶的每一侧的六个圆盘组成，以硅条带模块作为基本单元。每个模块由一个传感器和一个或多个容纳读出电子器件的柔性电路组成。在实验中，模块安装在集成电源和冷却的支撑结构上。这些模块的几何形状设计可容纳中心（筒）和前部（端盖）区域，筒中有矩形传感器，端盖中有楔形传感器。条带的长度和间距大小根据区域的占用率而变化。在这篇文章中，我们提出了第一个全尺寸模块的最里面的向前区域，命名为环0在ATLAS ITk条探测器命名的电气测试的建设和结果。该模块使用具有立体环形几何形状的传感器，具有不同长度和间距的四段条带。两个最里面的条段通过八个芯片读出，总共2048条，而两个最外面的段通过九个芯片读出，总共2304条。我们介绍了组装过程，导致模块的建设以及测试过程中的中间步骤。
The ATLAS experiment will replace the existing Inner Detector by an all-silicon detector named the Inner Tracker (ITk) for the High Luminosity LHC upgrades. In the outer region of the ITk is the strip detector, which consists of a four layer barrel and six discs to each side of the barrel, with silicon-strip modules as basic units. Each module is composed of a sensor and one or more flex circuits that hold the read-out electronics. In the experiment, the modules are mounted on support structures with integrated power and cooling. The modules are designed with geometries that accommodate the central (barrel) and forward (end-cap) regions, with rectangular sensors in the barrels and wedge shaped sensors in the end-caps. The strips lengths and pitch sizes vary according to the occupancy of the region.In this contribution, we present the construction and results of the electrical tests of the first full-size module of the innermost forward region, namedRing 0in the ATLAS ITk strip detector nomenclature. This module uses a sensor with stereo annulus geometry, having four segments of strips of different lengths and pitch. The two innermost strips segments are read out through eight chips, for a total of 2048 strips, while the two outermost segments are read out through nine chips, for a total of 2304 strips. We introduce the assembly procedure that lead to the construction of the module as well as the testing during the intermediate steps.
FEAST2：耐辐射和磁场负载点降压 DC/DC 转换器
DOI：
10.1109/redw.2014.7004569
发表时间：
2014
期刊：
2014 IEEE Radiation Effects Data Workshop (REDW)
影响因子：
--
作者：
F. Faccio;G. Blanchot;C. Fuentes;S. Michelis;S. Orlandi;S. Saggini;I. Troyano
通讯作者：
I. Troyano
ATLAS ITk Strip 立体环形传感器的第一个体积和表面结果
DOI：
--
发表时间：
2019
期刊：
Nuclear Instruments and Methods in Physics Research Section A : Accelerators, Spectrometers, Detectors and Associated Equipment
影响因子：
--
作者：
R. Hunter;S. H. Abidi;A. Affolder;J. Bohm;J. Botte;B. Ciungu;K. Dette;Z. Doležal;C. Escobar;V. Fadeyev;J. Fernandez;C. G. Argos;D. Gillberg;K. Hara;M. Hauser;K. Jakobs;J. Keller;P. Kodyš;T. Koffas;Z. Kotek;J. Kroll;C. Lacasta;V. Latonova;J. Loenker;D. Madaffari;M. Mikestikova;M. Miñano;S. Ng;R. Orr;U. Parzefall;D. Rodriguez;U. Soldevila;J. Šťastný;M. Stegler;J. Suzuki;R. Teuscher;Y. Unno;S. Wada;M. Wiehe;L. Wiik;F. Wizemann;V. Zahradník
通讯作者：
V. Zahradník