CanariCam: a multimode mid-infrared camera for the Gran Telescopio CANARIAS
CanariCam: a multimode mid-infrared camera for the Gran Telescopio CANARIAS
复制标题
CanariCam:用于 Gran Telescopio CANARIAS 的多模式中红外相机
DOI:
10.1117/12.458979
复制
发表时间:
2003
期刊:
影响因子:
--
通讯作者:
R. Sellar
中科院分区:
文献类型:
--
作者:
C. Telesco;D. Ciardi;J. French;C. Ftaclas;K. Hanna;D. Hon;J. Hough;J. Julian;Roger E. Julian;M. Kidger;C. Packham;R. Piña;F. Városi;R. Sellar
The University of Florida is developing a mid-infrared camera for the 10.4-meter Gran Telescopio CANARIAS. CanariCam has four science modes and two engineering modes, which use the same 320 x 240-pixel, arsenic-doped silicon, blocked-impurity-band detector from Raytheon. Each mode can be remotely selected quickly during an observing sequence. The pixel scale is 0.08 arcsec, resulting in Nyquist sampling of the diffraction-limited point-spread-function at 8 μm, the shortest wavelength for which CanariCam is optimized. The total available field of view for imaging is 26 arcsec x 19 arcsec. The primary science mode will be diffraction-limited imaging using one of several available spectral filters in the 10 μm (8-14 μm) and 20 μm (16-25 μm) atmospheric windows. Any one of four plane gratings can be inserted for low and moderate-resolution (R = 100 - 1300) slit spectroscopy in the 10 and 20-μm regions. Insertion of appropriate field and pupil stops converts the camera into a coronagraph, while insertion of an internal rotating half-wave plate, a field mask, and a Wollaston prism converts the camera into a dual-beam polarimeter.