Ka-band characterization and RF design of Acrynolitrile Butadiene Styrene (ABS)
Ka-band characterization and RF design of Acrynolitrile Butadiene Styrene (ABS)
复制标题
丙烯腈丁二烯苯乙烯 (ABS) 的 Ka 波段表征和射频设计
DOI：
10.1109/mwsym.2015.7167121
复制
发表时间：
2015
期刊：
影响因子：
--
通讯作者：
J. Papapolymerou
中科院分区：
文献类型：
--
作者：
Aida L. Vera;E. Rojas;M. Cordoba;T. Weller;J. Papapolymerou
本文介绍了常用3D打印材料丙烯腈-丁二烯-苯乙烯（ABS）的高频特性数据。使用空腔谐振器在30 GHz左右表征材料。外推的数据被用来设计一个微带贴片天线约25 GHz。该天线使用熔融沉积成型（FDM）和直接打印增材制造（DPAM）的组合来制造。模拟结果与实测结果吻合较好。这是ABS表征的第一个已知结果，也是在此频率范围内报告的数字制造天线。
This paper presents high frequency characterization data of the commonly used 3D-printing material Acrynolitrile Butadiene Styrene (ABS). A cavity resonator was used to characterize the material around 30 GHz. The extrapolated data was used to design a microstrip patch antenna around 25 GHz. The antenna was fabricated using a combination of fused deposition modeling (FDM) and direct print additive manufacturing (DPAM). Good agreement was found between simulated and measured results. These are the first known results of ABS characterization and a digitally-manufactured antenna to be reported in this frequency range.