Understanding the strain effect on coercivity enhancement in L10-Mn56Ga42 alloy via low-energy mechanical cryomilling
Understanding the strain effect on coercivity enhancement in L10-Mn56Ga42 alloy via low-energy mechanical cryomilling
复制标题
通过低能机械低温铣削了解应变对 L10-Mn56Ga42 合金矫顽力增强的影响
DOI：
10.1016/j.jmmm.2020.166883
复制
发表时间：
2020
期刊：
影响因子：
--
通讯作者：
岳明
中科院分区：
文献类型：
--
作者：
路清梅;王大军;李虹霏;张红国;李玉卿;岳明
Varying degrees of strain were observed inL10-Mn56Ga42powders via low-energy mechanical cryomilling, and the relationship between coercivity and strain was analyzed in detail. With increasing milling time, the powders do not show obvious variations in grain size and cell parameters, but a large strain is induced into the powders, leading to a remarkable enhancement in coercivity. A maximum coercivity of up to 6.7 kOe was accomplished for 20 h milled powders, with a high residual strain of about 0.96%. The initial magnetization curve indicates that the coercivity mechanism is mainly governed by the domain-wall pinning process where strain-induced defects act as pinning centers. Studies on heat treatments show that the strain-induced coercivity contributes to over 50% of the total coercivity, and a moderate annealing can eliminate the strain, changing the coercivity mechanism to a nucleation process.
