Production of High-strength Cokes from Non-/Slightly Caking Coals. Part I: Effects of Coal Pretreatment and Variables for Briquetting and Carbonization on Coke Properties
Production of High-strength Cokes from Non-/Slightly Caking Coals. Part I: Effects of Coal Pretreatment and Variables for Briquetting and Carbonization on Coke Properties
复制标题
用不粘煤/微粘煤生产高强度焦炭。
DOI:
10.2355/isijinternational.isijint-2018-819
复制
发表时间:
2019
影响因子:
1.8
通讯作者:
J. Hayashi
中科院分区:
文献类型:
--
作者:
M. Matoba;Shinji Kudo;Aska Mori;K. Norinaga;Kenya Uchida;Y. Dohi;K. Uebo;J. Hayashi
Technologies for producing coke available in blast furnace operation from nonand slightly caking coals, in other words, without caking coals, are desired for sustainable ironmaking.1) Studies on binderless coal briquetting at ambient temperature,2–5) 300–350°C6) or 300–500°C7) were reported previously. Following those studies, the present authors8–11) proposed binderless briquetting of lignite at temperature up to 200°C by taking advantage of its thermophysical behavior; a sort of plasticization that is arisen from local mobility of relatively flexible macromolecular network.12–14) The hot briquetting enabled to prepare highly densified briquettes from a Victorian lignite.8) Subsequent carbonization by heating the briquettes up to 900°C transformed them into cokes with tensile strength ranging from 20 to 40 MPa.8) Such strength was much greater than that favored for use in blast furnace, around 5 MPa.15–18) This work was followed by those on coke preparation from hydrothermally treated Indonesian lignites,9) coke preparation from Victorian ligProduction of High-strength Cokes from Non-/Slightly Caking Coals. Part I: Effects of Coal Pretreatment and Variables for Briquetting and Carbonization on Coke Properties