Optimal Design of a Fin-type Silica Gel Tube Module in the Silica Gel/Water Adsorption Heat Pump
Optimal Design of a Fin-type Silica Gel Tube Module in the Silica Gel/Water Adsorption Heat Pump
复制标题
硅胶/水吸附式热泵翅片式硅胶管模块的优化设计
DOI：
10.1252/jcej.37.551
复制
发表时间：
2004
影响因子：
0.8
通讯作者：
M. Hasatani
中科院分区：
文献类型：
--
作者：
Jianfang Li;M. Kubota;Fujio Watanabe;N. Kobayashi;M. Hasatani
提出了一种以翅片式硅胶管（FST）组件为吸附器的硅胶/水吸附式热泵（AHP），用于生产温度低于288 K的冷热能。考虑到这种硅胶/水AHP的性能，在FST模块的传热和传质特性进行了研究，所提出的模型，并确定最佳的尺寸（翅片间距和翅片长度）的FST模块，以获得最大的冷热量输出。发现在吸附器中使用优化的FST模块的AHP可以产生与使用先前的FST模块的AHP一样多的2倍的冷热量输出（Fujisawa等人，2002年）。
The silica gel/water adsorption heat pump (AHP) with an adsorber consisted of fin-type silica gel tube (FST) modules was proposed for producing cold heat energy with temperature below 288 K. Considering the performance of such a silica gel/water AHP, the heat and mass transfer characteristics in the FST module were studied by the proposed model, and the optimal sizes (fin pitch and fin length) of the FST module for obtaining maximum cold heat output were decided. It is found that an AHP using the optimized FST module in the adsorber can produce 2 times cold heat output as much as the AHP using the previous FST module (Fujisawa et al., 2002).