Constructing a rigid crosslinked structure for enhanced conductivity of imidazolium functionalized polysulfone hydroxide exchange membrane
Constructing a rigid crosslinked structure for enhanced conductivity of imidazolium functionalized polysulfone hydroxide exchange membrane
复制标题
构建刚性交联结构以增强咪唑功能化聚砜氢氧化物交换膜的电导率
DOI：
10.1016/j.ijhydene.2016.04.059
复制
发表时间：
2016-07-06
影响因子：
7.2
通讯作者：
Yan, Xiaoming
中科院分区：
文献类型：
--
作者：
Dai, Jian;He, Gaohong;Yan, Xiaoming
A series of novel bis-imidazolium crosslinked polysulfone membranes (CL-PSf-ImOHs) membranes were prepared through simultaneous quaternization and crosslinking reactions of 4,4'-bis(2-methylimidazole-1-ylmethyl)diphenyl (bis-Im-diPh) and chloromethyl groups on the polymer during the membrane formation. The novel bis-Im-diPh crosslinker possesses a rigid bis-phenyl structure, which creates large free volume and leads to the formation of continuous hydroxide conducting channels in the membrane as demonstrated by TEM. The properties of the crosslinked membrane were controlled by varying the molar ratio (Rats) of bis-Im-diPh and chloromethyl groups from 0.18 to 0.33. With increasing R-d/c, the swelling ratio decreases, and the hydroxide conductivity increases. The CL-PSf-ImOH membrane with R-d/c of 0.33 exhibits the conductivity of 112 mS cm(-1) at 60 degrees C, much higher than that of non-crosslinked membrane (83 mS cm(-1), losing its morphology at 60 degrees C) and those of other crosslinked membranes (17-68 mS cm(-1)) prepared with the similar methods. In addition, the CL-PSf-ImOH membranes show good dimensional stability at elevated temperatures. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
