Hot Isostatic Pressed Gd2O2S:Pr, Ce, F Translucent Scintillator Ceramics for X-Ray Computed Tomography Detectors

Hot Isostatic Pressed Gd2O2S:Pr, Ce, F Translucent Scintillator Ceramics for X-Ray Computed Tomography Detectors
复制标题

DOI:
10.1143/jjap.27.l1371
复制
发表时间:
1988-08
影响因子:
1.5
通讯作者:
Yukio Ito;H. Yamada;M. Yoshida;Hideji Fujii;G. Toda;H. Takeuchi;Y. Tsukuda
Yukio Ito;H. Yamada;M. Yoshida;Hideji Fujii;G. Toda;H. Takeuchi;Y. Tsukuda
中科院分区:
物理与天体物理4区
文献类型:
--
作者:
Yukio Ito;H. Yamada;M. Yoshida;Hideji Fujii;G. Toda;H. Takeuchi;Y. Tsukuda

文献摘要

被引文献

相似文献

采用热等静压(HIP)工艺制备了Gd2O2S:Pr,Ce,F半透明闪烁体陶瓷。光学透射率约为入射光的60%,X射线阻止能力也相当高。由于HIP致密化工艺增强了这些性能,当用120 kV X射线激发时,1 mm厚的样品与硅光电二极管结合的最高光输出达到了CdWO4单晶的1.8倍。本陶瓷是非常有前途的候选人闪烁体材料在X射线计算机断层扫描(CT)探测器的应用。
Translucent scintillator ceramics of Gd2O2S:Pr, Ce, F were fabricated using a hot isostatic pressing (HIP) technique. The optical transmission is about 60% of the incident light and the X-ray stopping power is also quite high. Owing to the enhancement of these properties by the HIP densification process, the highest light output from a 1 mm thick specimen combined with a silicon photodiode, when excited by 120 kV X-rays, has reached 1.8 times that of CdWO4 single crystals. The present ceramics are very promising candidates for scintillator materials in X-ray computed tomography (CT) detector applications.