A portable telescope based on the ALIBAVA system for test beam studies
A portable telescope based on the ALIBAVA system for test beam studies
复制标题
基于 ALIBAVA 系统的便携式望远镜,用于测试光束研究
DOI:
10.1016/j.nima.2013.06.067
复制
发表时间:
2013
期刊:
影响因子:
--
通讯作者:
Bernabeu J
中科院分区:
文献类型:
--
作者:
Bernabeu J
A test beam telescope has been built using the ALIBAVA system to drive its data acquisition. The basic telescope planes consist of four XYT stations. Each station is built from a detector board with two strip sensors, mounted one in each side (strips crossing at 90°). The ensemble is coupled to an ALIBAVA daughter board. These stations act as reference frame and allow a precise track reconstruction. The system is triggered by the coincidence signal of the two scintillators located up and down stream. The telescope can hold several devices under tests. Each ALIBAVA daughter board is linked to its corresponding mother board. The system can hold up to 16 mother boards. A master board synchronizes and controls all the mother boards and collects their data. The off-line analysis software has been developed to study the charge collection, cluster width, tracking efficiency, resolution, etc., of the devices under test. Moreover, the built-in ALIBAVA TDC allows the analysis of the time profile of the device signal. The ALIBAVA telescope has been successfully operated in two test runs at the DESY and CERN-SPS beam lines.
DOI:
--
发表时间:
2011
期刊:
影响因子:
--
作者:
R. Marco
通讯作者:
R. Marco