Properties of geopolymer modified sludge generated in landslide area designed by Taguchi method
Properties of geopolymer modified sludge generated in landslide area designed by Taguchi method
复制标题
田口法设计的滑坡区生成的地质聚合物改性污泥的特性
DOI：
10.1007/978-981-15-0802-8_108
复制
发表时间：
2019
期刊：
影响因子：
--
通讯作者：
Tomoaki SATOMI and Hiroshi TAKAHASHI
中科院分区：
文献类型：
--
作者：
Minh Chien VU;Tomoaki SATOMI and Hiroshi TAKAHASHI
为了使地聚合物的反应达到预期的强度和形状，热处理是必要的。然而，这也是影响地聚合物在施工现场应用的缺点。因此，本文主要关注软土环境下合成地聚合物基质的其他重要因素，而不是热处理。田口法用于确定影响地聚合物改性污泥几种性能的最重要因素，通过最小化变化的影响，但不消除原因。结果表明，地聚合物含量、污泥中粘土含量、初始含水量和含水率对改性污泥的不同性能有独特的影响。
It has been claimed that heat treatment is necessary for the reaction of geopolymer to achieve the desired strength and form. However, it’s also the drawback affecting the application of Geopolymer in the construction site. There-fore, instead of heat treatment, the other important factors for synthesizing the geopolymer matrix in the soft soil environment, is the main focusing of this paper. The Taguchi method was used to determine the most important factor that affects several properties of geopolymer modified sludge by minimizing the effects of variation, but without eliminating the cause. The results indicate that the geopolymer content, clay content in sludge, initial water content and moisture content play a unique role in different properties of modified sludge.