Dual-wavelength laser operation in a-cut Nd:MgO:LiNbO3

Dual-wavelength laser operation in a-cut Nd:MgO:LiNbO3
复制标题

DOI:
10.1016/j.optmat.2016.01.056
复制
发表时间:
2016-03
期刊:
影响因子:
3.9
通讯作者:
Mingqi Fan;T. Li;Shengzhi Zhao;Guoru Li;Diao Li;Kejian Yang;W. Qiao;Shixia Li
Mingqi Fan;T. Li;Shengzhi Zhao;Guoru Li;Diao Li;Kejian Yang;W. Qiao;Shixia Li
中科院分区:
材料科学3区
文献类型:
--
作者:
Mingqi Fan;T. Li;Shengzhi Zhao;Guoru Li;Diao Li;Kejian Yang;W. Qiao;Shixia Li

文献摘要

相似文献

对1085和1093 nm附近的双波长a切Nd:MgO:LiNbO 3激光器进行了实验和理论研究。同时双波长发射主要归因于在流形4 I11/2中斯塔克分裂能级的玻尔兹曼分布。在吸收泵浦功率为7.45 W时,获得了1.23 W的最大连续波输出,斜率效率为21.2%。采用Cr:YAG作为可饱和吸收体,在重复频率为24 kHz时,获得了脉宽为28 ns的最短脉冲,峰值功率为729 W。
Diode-pumped dual-wavelength a-cut Nd:MgO:LiNbO3lasers near 1085 and 1093 nm were experimentally and theoretically investigated. The simultaneous dual-wavelength emitting was mainly attributed to the Boltzmann distribution of the occupation in the Stark-split energy-levels in manifold4I11/2. Under an absorbed pump power of 7.45 W, a maximum continuous wave (CW) output power of 1.23 W was obtained, giving a slope efficiency of 21.2%. Using Cr:YAG as saturable absorber, the shortest pulse duration of 28 ns was obtained with a repetition rate of 24 kHz, resulting in a peak power of 729 W.