THICKNESS AND MARKING CHARACTERISTICS OF OCCLUSAL REGISTRATION STRIPS
THICKNESS AND MARKING CHARACTERISTICS OF OCCLUSAL REGISTRATION STRIPS
复制标题
DOI：
10.1016/s0022-3913(85)80086-x
复制
发表时间：
1985-01-01
影响因子：
4.6
通讯作者：
BRUKL, CE
中科院分区：
文献类型：
--
作者：
SCHELB, E;KAISER, DA;BRUKL, CE
结果绘制了样品配准条厚度与标记表面积的关系图。表二显示了测量厚度的平均值和标准偏差。条带厚度和标记面积之间的关系如散点图(图5)和相关图(图6)所示。结果描绘了条带厚度和标记面积之间的近似线性关系：条带越厚，标记越大(图5和图6)。红色纸张的标记比厚度相近的注册条大，而最薄的注册材料聚脂塑料条产生的标记比纸张或色带小(图5至7)。
RESULTSThe relationship of thickness of the registration strips to surface area of the mark was plotted for the samples. Table II displays the means and standard deviations of the measured thicknesses. The relationship between strip thickness and area of mark is illustrated in the scattergram (Fig. 5) and the correlation plots (Fig. 6). The results depict approximate linear relationships between strip thicknesses and areas of marks: the thicker the strip, the larger the mark (Figs. 5 and 6). Red papers register larger marks than registration strips of similar thicknesses, while the thinnest registration material, mylar plastic strips, produced smaller marks than papers or ribbons (Figs. 5 to 7).