Photovoltaic system using Buck-Boost PWM Power Inverter
Photovoltaic system using Buck-Boost PWM Power Inverter
复制标题
使用Buck-Boost PWM功率逆变器的光伏系统
DOI：
10.1541/ieejias.114.885
复制
发表时间：
1994
影响因子：
--
通讯作者：
K. Harada
中科院分区：
文献类型：
--
作者：
M. Nagao;Hideo Horikawa;K. Harada
介绍了一种升降压PWM逆变电源及其在住宅光伏发电系统中的应用。PWM功率逆变器是通过在不连续导通模式（DCM）下驱动由高频升降压斩波器构成的逆变器来实现的。采用逆变电源的光伏系统具有以下优点：（1）由光伏阵列产生的功率可以在任何阵列电压下传输到负载和公用事业线，（2）光伏阵列和公用事业线之间的隔离由作为能量存储元件操作的小型高频电抗器执行，（3）不需要电抗器来链接公用事业线，（4）提供单位功率因数操作。（5）因此系统配置非常简单。分析了系统的输入输出特性。作为结果，阵列电流的涟漪分量和接口和公用事业线之间的功率流的推导，并进行了实验验证。
This paper presents a buck-boost PWM power inverter and its application for residential photovoltaic system. The PWM power inverter is realized by driving a inverter constructed with a high frequency buck-boost chopper in the discontinuous conduction mode (DCM). Photovoltaic system with the power inverter has the following advantages: (1) The power generated by the photovoltaic array can be transfered to the load and the utility line under any array voltage, (2) Isolation between the photovoltaic array and the utility line is performed by a small high frequency reactor operating as energy storage element, (3) There is no need of a reactor to link the utility line, (4) Unity power factor operation is provided, (5) So the system configuration is very simple. The input-output characteristics of the system is analyzed. As the result, the ripple component of the array current and the power flow between the interface and the utility line are derived, and verified experimentally.