Application of a Prechirp Technique to 10-Gb/s Transmission at 1064 nm Through 24 km of Photonic Crystal Fiber

Application of a Prechirp Technique to 10-Gb/s Transmission at 1064 nm Through 24 km of Photonic Crystal Fiber
复制标题

应用预线性调频技术通过 24 km 光子晶体光纤实现 1064 nm 10 Gb/s 传输

DOI:
10.1109/lpt.2006.883324
复制
发表时间:
2006
影响因子:
2.6
通讯作者:
K. Shiraki
K. Shiraki
中科院分区:
工程技术3区
文献类型:
--
作者:
K. Tsujikawa;K. Kurokawa;K. Tajima;K. Nakajima;T. Matsui;I. Sankawa;K. Shiraki

文献摘要

被引文献

相似文献

从理论和实验两方面研究了预啁啾对光子晶体光纤(PCF)1000 nm波段10 Gb/s传输的影响。我们使用一个24公里长的光子晶体光纤进行传输实验,其光损耗和色散分别为0.94 dB/km和-20 ps/nm/km在1064 nm。我们确认了传输后比特误码率性能的改善,即约-0.5 dB的“负功率惩罚”。我们的实验结果和理论估计表明,采用预啁啾技术和传统的Z切钛酸锂调制器可以有效地抑制色散引起的信号退化
The prechirp effect on 10-Gb/s transmission in the 1000-nm band over photonic crystal fiber (PCF) was investigated both experimentally and theoretically. We performed transmission experiments using a 24-km-long PCF whose optical loss and chromatic dispersion were 0.94 dB/km and -20 ps/nm/km at 1064 nm, respectively. We confirmed an improvement in the bit-error-rate performance after the transmission, namely a "negative power penalty" of about -0.5 dB. Our experimental result and theoretical estimation revealed that the signal degradation induced by the chromatic dispersion can be effectively suppressed by employing the prechirp technique with a conventional Z-cut lithium niobate modulator