Determination of 1-methylhistidine and 3-methylhistidine by capillary and chip electrophoresis with contactless conductivity detection
Determination of 1-methylhistidine and 3-methylhistidine by capillary and chip electrophoresis with contactless conductivity detection
复制标题
DOI：
10.1002/elps.200600697
复制
发表时间：
2007-07-01
期刊：
影响因子：
2.9
通讯作者：
Stulik, Karel
中科院分区：
文献类型：
--
作者：
Tuma, Petr;Samcova, Eva;Stulik, Karel
CE with capacitively coupled contactless detection ((CD)-D-4) was used to determine 3-methyl-histidine (3-MH) and 1-methylhistidine (1-MH). The (CD)-D-4 response to 3-MH was studied in a BGE consisting of 500 mM acetic acid and ammonia at varying concentration and the results were compared with the theory. Complete separation of a model mixture of 3-MH, 1-MH, and histidine (His) was attained in two optimized BGEs, one containing 500 mM HAc, 20 mM NH4OH, and 0.1 % m/vhydroxyethylcellulose (HEC), pH 3.4 (1) and the other consisting of 100 mM morpholinoethanesulfonic acid (MES), 25 mM LiOH, and 0.1 % m/v HEC, pH 5.5 (II). These optimized BGEs were tested in CE/C4 D analyses of urine. Promising results were obtained for separation and determination of 3-MH, 1-MH, and His on a silicon microchip, using aluminum strips as the C4 D electrodes; the three analytes were baseline-separated within less than 30 s with a separation channel effective length of 38 mm. The LOD were satisfactory and amounted to 26.4 mu M for 3-MH and 18.3 mu M for 1-MH.
