An Architecture and Interfaces for Distributed Manufacturing Simulation
An Architecture and Interfaces for Distributed Manufacturing Simulation
复制标题
分布式制造仿真的体系结构和接口
DOI：
10.1177/0037549705052326
复制
发表时间：
2004
期刊：
影响因子：
--
通讯作者：
Y. T. Lee
中科院分区：
文献类型：
--
作者：
C. McLean;F. Riddick;Y. T. Lee
本文概述了一个中立的参考体系结构和数据模型，用于将分布式制造仿真系统相互集成，与其他制造软件应用程序集成，以及与制造数据存储库集成。其他制造软件应用包括但不限于用于设计产品、指定过程、设计制造系统和管理生产的系统。该体系结构识别了软件构建块和接口，这些模块和接口将促进分布式仿真系统的集成，并使这些系统能够与其他制造软件应用程序集成。该体系结构建立在仿真的高级体系结构标准之上。美国国家标准与技术研究所及其合作者已经使用商业现成的模拟器创建了该架构部分的几个实现。这些实现证明了该架构的可行性，并强调了需要一个中立的数据模型来在仿真之间交换制造数据。
This article presents an overview of a neutral reference architecture and data model for integrating distributed manufacturing simulation systems with each other, with other manufacturing software applications, and with manufacturing data repositories. Other manufacturing software applications include but are not limited to systems used to design products, specify processes, engineer manufacturing systems, and manage production. The architecture identifies the software building blocks and interfaces that will facilitate the integration of distributed simulation systems and enable the integration of those systems with other manufacturing software applications. The architecture builds on the High Level Architecture standard for simulation. The National Institute of Standards and Technology and its collaborators have created several implementations of portions of the architecture using commercial off-the-shelf simulators. These implementations demonstrated the feasibility of the architecture and highlighted the need for a neutral data model for exchanging manufacturing data between simulations.