70 Gbps 4-PAM and 56 Gbps 8-PAM Using an 850 nm VCSEL

70 Gbps 4-PAM and 56 Gbps 8-PAM Using an 850 nm VCSEL
复制标题

DOI:
10.1109/jlt.2015.2389898
复制
发表时间:
2014-11
影响因子:
4.7
通讯作者:
K. Szczerba;P. Westbergh;M. Karlsson;P. Andrekson;A. Larsson
K. Szczerba;P. Westbergh;M. Karlsson;P. Andrekson;A. Larsson
中科院分区:
工程技术2区
文献类型:
--
作者:
K. Szczerba;P. Westbergh;M. Karlsson;P. Andrekson;A. Larsson

文献摘要

被引文献

相似文献

我们提出了56 Gbps的非均衡8脉冲幅度调制(PAM)的实时传输超过50米的多模光纤和70 Gbps的4-PAM操作与离线均衡。FEC在这两种方案中都是必要的。考虑到达到低于10-12的BER所需的FEC开销,给出了比特率。实验采用850 nm垂直腔面发射激光器和22 GHz光接收器。我们表明,8-PAM调制需要信道带宽与符号速率相媲美,以避免过度的ISI惩罚和4-PAM信号的均衡可以显着提高可实现的比特率。
We present 56 Gbps unequalized 8-pulse-amplitude-modulation (PAM) real-time transmission over 50 m of multimode fiber and 70 Gbps 4-PAM operation with offline equalization. FEC would be necessary in both schemes. The bit-rates are given taking into account the FEC overhead needed to reach a BER below 10-12. The experiments were performed with an 850 nm vertical cavity surface emitting laser with 20 GHz bandwidth and a 22 GHz photoreceiver. We show that 8-PAM modulation requires channel bandwidth comparable with the symbol rate to avoid excessive ISI penalty and that equalization of 4-PAM signal can significantly improve achievable bit-rates.