The Effect of Recrystallization Texture on the Low-Temperature Deformation Behaviour of a Two-Phase Stainless Steel
The Effect of Recrystallization Texture on the Low-Temperature Deformation Behaviour of a Two-Phase Stainless Steel
复制标题
再结晶织构对两相不锈钢低温变形行为的影响
DOI：
10.2355/tetsutohagane1955.61.8_2067
复制
发表时间：
1975
期刊：
影响因子：
--
通讯作者：
K. Wakasa
中科院分区：
文献类型：
--
作者：
Tadahisa Nakamura;K. Wakasa
简介：研究了一种由体积接近相等的奥氏体和铁素体组成的双相钢在-96 ℃ ~室温范围内的拉伸性能、应变诱发马氏体相变和断裂方式。在奥氏体和铁素体相中均观察到再结晶织构。在平行于轧制方向（φ =0·<$）、45·<$和垂直于轧制方向（φ =90·<$）的方向上采集拉伸试样。所获得的主要结果如下：
Synopsis: The tensile properties, the strain-induced martensite transformation and the fracture mode in the temperature range between -96•Ž, and room temperature were studied for a two-phase steel composed of nearly equal volumes of austenite and ferrite. Recrystallization textures were observed in both the austenite and ferrite phases. Tensile test specimens were taken in the directions parallel (ƒÆ=0•‹), 45•‹, and vertical (0=90•‹) to the rolling direction. The main results obtained are as follows: