Influence of Tool Shape and Coating Type on Machined Surface Quality in Face Milling of CFRP
Influence of Tool Shape and Coating Type on Machined Surface Quality in Face Milling of CFRP
复制标题
CFRP平面铣削刀具形状和涂层类型对加工表面质量的影响
DOI：
10.4028/www.scientific.net/amr.1017.310
复制
发表时间：
2014
期刊：
影响因子：
--
通讯作者：
K. Ogawa
中科院分区：
文献类型：
--
作者：
T. Furuki;T. Hirogaki;E. Aoyama;Hiroyuki Kodama;K. Ogawa
随着对碳纤维增强塑料（CFRP）需求的不断增加，对CFRP加工的研究也越来越多。然而，由于已经有关于多余部分的修剪或钻孔的报道，我们专注于面加工和用几种切削刀具生成台阶形状。CFRP加工中的问题包括出现毛刺和分层。因此，在这份报告中，我们调查这些问题的面铣削。并对加工过程中的加工行为（切削温度、切削力）进行了估算。
Since demands for Carbon Fiber Reinforced Plastics (CFRP) are increasing, the number of the studies on machining of CFRP is also increasing. However, since there are already reports on a trimming of a surplus portion or a drilling, we focus on a face machining and a generating the step shape with several cutting tools. Problems in the machining of CFRP include an occurrence of the burr and delamination. Therefore, in this report, we investigate these problems in face milling. And, the machining behavior (Cutting temperature, Cutting force) during the machining is estimated.