Strength parameters of the ABS materials used in 3D printing
Strength parameters of the ABS materials used in 3D printing
复制标题
3D打印用ABS材料的强度参数
DOI：
10.1063/1.5066498
复制
发表时间：
2018
影响因子：
7.5
通讯作者：
R. Gabor
中科院分区：
文献类型：
--
作者：
Agnieszka Łagoda;R. Gabor
需要用具有高耐用性和制造简单性的更便宜的材料来代替机械结构中使用的传统材料。另一种替代技术是使用 ABS 材料（聚（丙烯腈-丁二烯-苯乙烯共聚物））的 3D 打印技术。 3D打印技术确保了原型制作阶段模型尺寸和形状的快速变化以及新元件相对便宜的成本。市场上有许多塑料材料生产商提供 3D 打印机。本文选取其中两种进行比较，并确定了它们的力学参数。对该材料进行了模态分析，并对获得的共振频率值进行了比较。需要用具有高耐用性和制造简单性的更便宜的材料来取代机械结构中使用的传统材料。另一种替代技术是使用 ABS 材料（聚（丙烯腈-丁二烯-苯乙烯共聚物））的 3D 打印技术。 3D打印技术确保了原型制作阶段模型尺寸和形状的快速变化以及新元件相对便宜的成本。市场上有许多塑料材料生产商提供 3D 打印机。本文选取其中两种进行比较，并确定了它们的力学参数。对该材料进行了模态分析，并对获得的共振频率值进行了比较。
There is need to replace the traditional materials used in mechanical constructions with cheaper materials characterized by high durability and simplicity of manufacturing. An alternative technology is 3D printing technology that uses ABS material (poly (acrylonitrile-co-butadiene-co-styrene)). 3D printing technology ensures the rapid change of model dimensions and shapes at the prototyping stage and a relatively cheap cost of new elements. There are many plastic materials producers on the market for a 3D printer. In this paper two of them have been choosen to a comparison and their mechanical parameters have been determined. The modal analysis of this material was carried out and the obtained values of resonance frequencies were compared.There is need to replace the traditional materials used in mechanical constructions with cheaper materials characterized by high durability and simplicity of manufacturing. An alternative technology is 3D printing technology that uses ABS material (poly (acrylonitrile-co-butadiene-co-styrene)). 3D printing technology ensures the rapid change of model dimensions and shapes at the prototyping stage and a relatively cheap cost of new elements. There are many plastic materials producers on the market for a 3D printer. In this paper two of them have been choosen to a comparison and their mechanical parameters have been determined. The modal analysis of this material was carried out and the obtained values of resonance frequencies were compared.